AES 7170 Bedienungsanleitung PDF herunterladen (Seite 78)

40-7705I-UM Page 78 Rev 4 March 16, 2007

• The timeout function works when a packet is stored for

forwarding in any subscriber with TTL capability, which will

decrement the TTL time for the packet it is storing. When TTL

time has expired, the packet is aborted. This function does not

work with non-TTL (pre-Version 2.1) subscribers. The TTL

feature works best when the majority of subscribers, or the

subscribers that are most heavily used, have the feature in the

firmware. Call your AES representative for upgrade information.

Default time for Check-In Packets is 00 hours, 30 minutes. DO

NOT enter a greater than 24 hrs 00 mins. Entering a time of 00

hours and 00 minutes deactivates the time-to-live function for that

packet type. The shortest allowed TTL time is 00 hours, 10

minutes. TTL can also be set for other packet types:

• Zone Alarm Packets • Status Packets

• Zone Restoral Packets

• AES-IntelliTap Packets

• Trouble / Trouble-Restoral Packets

The default time for the 6 packet types above is 00, i.e. the time-to-

live function is deactivated for these packets. Entering anything

greater than 00 HRS and 10 MINS will enable the Time-to-Live

function. Enter the data for each type, click [OK] to send.

To confirm the data, press <Alt>+<N> to query the subscriber for

Packet Life settings. When the TTL parameters packet has been

received back, check this screen again.

See - Get Packet Life Settings, Message Functions Group

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 110 111

Keine Kommentare

AES 7170 Bedienungsanleitung Seite 78